Spirited Snowmen - What's New At SU Blog Hop
Merry Christmas To All

Spirited Snowmen (CT #163)

Stampin Up, Stampin' Up! Spirited Snowmen stamp set #148072, Buffalo Check background stamp #147794, Blizzard Thinlits Die #147902, Frost White Shimmer Paint #147044, created by Stampin Scrapper, for more cards, gifts, ideas, scrapbooking and 3D projects go to stampinscrapper.com, Joyce Whitman

Did you see my post yesterday for the What's New at SU? blog hop?  If not check it out at Spirited Snowmen.   There were so many beautiful projects!  I can't wait to make some of them! I did the same technique on this card as I did on the card I posted for the blog hop yesterday.  This technique is called Ink Block technique and is very easy to do.  There is a little trick to getting the colors to blend, but I will explain that further down on my post.  

I made this card for my CASEing Tuesday challenge this week.  Here is the card that is our inspiration:

40049823_10215871617600308_6467511640085495808_n (1)

This post is going to be a little long as I got a lot of emails and comments about how I made it.  I am happy to share the directions with you, so here they are: 

  • stamp the 4" x 5 1/4" Whisper White with the Buffalo Check background stamp using Balmy Blue ink

On a different piece of 4" x 5 1/4" Whisper White paper you are going to stamp your background for the snowman.  To do this you will:

  • take the Balmy Blue ink pad and ink up one half of an "E" clear block.  The easiest way to do this is to hold the block in your left hand and then have the ink pad in your right hand and tap it on the block.  You want to make sure you are putting a lot of ink on it.
  • do the same thing on the other end of the block with Smoky Slate ink
  • using the Spritzer (with water in it) you will spray the block (with the ink on it) about 4-5 times 

This is the little tip I have for you.  Make sure you are putting on enough water, but not too much to make it drip.  It took me numerous attempts to finally figure out what I wasn't getting the look I wanted.  If you stamp it and have white spots, that means you don't have enough water on it.  I also learned that if you put too much water on it, it will drip and leave drip marks on your image.  

  • once you spritzed it with the water, you will flip over your block and push it hard on your paper. 

You will see it blend together through your block.  It is so neat to watch it do that!  You now need to let it dry completely.  You can use a heating tool if you want or wait about 10-15 minutes.  This is when I am working on other aspects of the card, such as cutting out the snowflake and getting my stamp and ink ready to stamp.

Stampin Up, Stampin' Up! Spirited Snowmen stamp set #148072, Buffalo Check background stamp #147794, Blizzard Thinlits Die #147902, Frost White Shimmer Paint #147044, created by Stampin Scrapper, for more cards, gifts, ideas, scrapbooking and 3D projects go to stampinscrapper.com, Joyce Whitman

The next step is adding the White Frost shimmer paint.

  • I used an old block I had, one I didn't care if it got messed up, and poured about 2-3 drops of shimmer paint on it.  I then used a sponge and tapped the paint all over the stamped image.  I then blended it all together to give it a real shiny look and then let it dry again. I did use shimmer paint on my snowflake too. 
  • after it is dry then you can stamp your image and sentiment.  I used Stazon ink as I wanted a real crisp look and I knew it would stay on.
  • add your other layers to the card base (I used Stampin Dimensionals under the black layer),  stamped image and then your embellishments last.

This isn't a hard technique, actually it is very easy.  The hardest thing is learning how much water to put on it.  I would suggest to practice a few times on copy paper first, before you use your good Whisper White cardstock.

Stampin Up, Stampin' Up! Spirited Snowmen stamp set #148072, Buffalo Check background stamp #147794, Blizzard Thinlits Die #147902, Frost White Shimmer Paint #147044, created by Stampin Scrapper, for more cards, gifts, ideas, scrapbooking and 3D projects go to stampinscrapper.com, Joyce Whitman

I tried to get a picture so you could see how shiny it is, but I just couldn't get it to come out.  You can see it a little on the bottom by the snowflake.  It is really pretty in the person.  

I hope these directions will help you when you try to do this technique.  I love it so much, I want to keep doing it.  LOL

  Stampin Up, Stampin' Up! Spirited Snowmen stamp set #148072, Buffalo Check background stamp #147794, Blizzard Thinlits Die #147902, Frost White Shimmer Paint #147044, created by Stampin Scrapper, for more cards, gifts, ideas, scrapbooking and 3D projects go to stampinscrapper.com, Joyce Whitman

Thank you for stopping by today!  I hope you had a wonderful holiday weekend and a great week!

Blog signature.jpg

If you need to purchase any products for this card, click the image below. If you would like to shop for other items, click on the SHOP NOW sign.  

Product List

Butterfly_logo-4

Comments

Feed You can follow this conversation by subscribing to the comment feed for this post.

Susan K

Thank you for sharing the directions. I always had white spots and now I know why! I can't wait to see what else you do with it!

Joyce Whitman

Susan, you are very welcome!

Verify your Comment

Previewing your Comment

This is only a preview. Your comment has not yet been posted.

Working...
Your comment could not be posted. Error type:
Your comment has been posted. Post another comment

The letters and numbers you entered did not match the image. Please try again.

As a final step before posting your comment, enter the letters and numbers you see in the image below. This prevents automated programs from posting comments.

Having trouble reading this image? View an alternate.

Working...

Post a comment

Your Information

(Name and email address are required. Email address will not be displayed with the comment.)